An LED neon sign is a great way of adding a unique twist to any area. You’d be amazed at how many signs can make a difference in a space. Their bright, colorful, and energetic light makes it easy to see them. Your LED neon sign should be kept clean and bright. Clean LED neon signs will give you the best possible effect and last longer.

You might be wondering about how to clean your neon sign. It’s quite simple. LED neon, like traditional neon, is made up of hundreds of light-emitting diodes, (LEDs), tiny lights, enclosed in synthetic polymer tubes. You can bend this tubing and make any design you want. This tube is so easy to clean that it’s much easier than the traditional neon lights, which are made out of glass and can heat up quickly. The best part about keeping your LED sign looking great is that you can do it yourself. You’d need to hire a professional electrician to clean your traditional neon sign.
Here’s how you can clean and maintain your neon signs.
1. Hang it in a suitable place
If you have purchased a sign, you likely already know where you will hang it. LED neon signs are very simple to set up. These signs are waterproof and durable, as well as more durable than traditional glass neon signs. This makes it tempting to set it up in odd places. You’ll have half the fun with an LED neon sign.
Be aware that although the sign is water-resistant, it does contain an adapter (and an electric cord) that needs to be plugged into a socket. You should make sure it doesn’t get wet or damaged like any other electrical appliance. An acrylic box will protect your sign if it is to be hung outside. This will prevent it from being damaged by passing vehicles or inclement weather. Keep your LED neon signs cleaner for longer by not hanging them directly below an air conditioner. There, condensation can collect dust and ruin its appearance.
Our signs are available at Radikal Naon. They come with a clear acrylic backing and a free wall mounting screw set to make them easy to install. Because the PVC tubes used to make our signs are sealed at their ends with silicone glue, they can be used in all kinds of weather.
2. Dust It Frequently
LED neon signs are safe to use and maintain. Even if you drop the sign the acrylic backing will not break. The LEDs are almost impossible for anyone to smash open the plastic tube. They don’t produce heat.
Instead, neon signs are made of hot-glowing glass. The glass that makes neon signs glow hot when dropped can cause it to shatter, releasing hazardous gases and glass particles.
How do I clean the dust off my LED neon sign Easily? To remove dust, use a feather duster. You can then use a soft brush or a nylon cloth with soft bristles to remove any remaining dust. Before cleaning the sign, be sure to unplug it. If you leave the sign on for too long, it may feel warm to the touch. You should allow the sign to cool off for a few minutes before dusting.
3. Remove stains and grime
Here are some ways to get rid of stains on your LED neon sign. You will need wet clean it. Unplug it first. Combine half a pint of water and half a pint of household ammonia in a small container. Then, dampen an absorbent cotton cloth with the mixture. Finally, clean your sign of any dirt. If ammonia isn’t your thing, vinegar and baking powder or even plain water will work.
The light-emitting polymer housing makes it easy for you to care for your LED neon sign. It is dependent on where the sign is located and how frequently it gets dirty. Remember that your sign should never be immersed in water or treated with strong chemicals. is available to provide suggestions for how to restore your sign, especially if it has been damaged by paints or other substances that are hard to clean.
4. It should be switched off periodically
If you have a sign that is used constantly, we recommend switching it off once a week for 24 hours. This can help extend the sign’s lifespan. It can also be easier to control the sign and prolong its life if you have requested a dimmer.
5. Have it professionally fixed
This is not the same question as how to clean your LED neon signs. It’s straightforward and economical to repair them. But it’s better to hire professionals to handle it. There are many possible ways your sign could become damaged. There are usually indicators to let you know what the problem might be. If your sign does not work or the status light of your transformer is flashing it means that there may be a short circuit. The problem could be caused by a loose cable or if your sign doesn’t illuminate at all. Sometimes the transformer can be faulty, which may be indicated by a failure of a status lamp.
In all cases, we can quickly identify and resolve the problem. Radikal Neon signs covered under warranty will be free of charge. We offer a fantastic 12-month warranty on all standard and custom LED signs.

6. If it is necessary to replace it
Sometimes it’s not practical to repair or clean an LED neon sign. How can you keep the vibe going? Replace it! Like traditional neon signs, LED signs are limited in lifespan. But, the difference is that LED neon signs are less expensive to run and replace. Radikal neon signs can provide up to four years of illumination or 40,000 hours.
A trusted company can guarantee high-quality neon signs which are easy to care for and last much longer. Radikal Neoon is a trusted brand that has received 5-star reviews from customers all over the world. Choose from hundreds of premade and custom-made signs. Keep checking out our blog for more information and to see our FAQs.